Products

The swan neck pipe is connected to the detector

If you are interested in our services or products, you can contact us directly. We look forward to cooperating with you!

The swan neck pipe is connected to the detector

■ 符合API标准干式阀，下装鹤管干式阀专用；

■ 液化气、液氨等压力装卸车专用，液相DN50专用、气相DN25专用、汽柴油气相DN100专用。

Online Investment Promotion

National Consultation Hotline

+86-400-6161-655

60-second manual response

Technical consultation response within 30 minutes

■ Equipment Overview

The loading swan neck pipe connection detector is suitable for the connection detection between the API dry valve or quick coupling of gasoline and diesel and the interface of the tanker truck. It determines whether the connection between the quick coupling of the swan neck pipe and the interface of the tanker truck is in place, and outputs the dry contact signal to the process controller to achieve effective safety interlock control during loading.

Dry valve in compliance with API standards, Special for dry-type valves with bottom-mounted swan neck pipes;

Special for pressure loading and unloading vehicles of liquefied gas, liquid ammonia, etc., special for liquid phase DN50, Special for gas phase DN25, special for gasoline and diesel gas phase DN100.

■ Technical Parameters

鹤管连接检测器.jpg

If you are interested in our products or if there's anything we can assist you with, you can call our national customer service hotline at any time: +86-400-6161-655

You can also communicate with us online. Of course, you can also leave us a message below. We will serve you wholeheartedly!

Products

Products

The swan neck pipe is connected to the detector

Digital and intelligent storage and transportation Management system

Loading & Unloading Equipment

Recommended News